Drop us a line and we will get back to you within 24 hours.
Long Cylinder
Fits 240 litre Bins
Stainless Steel Frame
Small Footprint (52 cm2)
Densely Compacted Waste
Reduced Energy Consumption
Suitable for kitchens & food preparation areas
The Mil-tek X-Press 100 Long Cylinder Waste Compactor is a small size waste compactor suitable for a variety of locations including kitchens, small cafes, food preparation sites, hospitals, offices, and general waste areas.The stainless steel waste press is small enough to be installed indoors and in clean, working environments. It is free from oil or other contaminants. With a footprint of less than 52cm², the XP100S Waste Press can easily be added to working environments such as food preparation areas, creating a seamless waste disposal process and minimizing any time wasted transporting waste.The long cylinder of the XP100S Waste Press compacts waste more densely with each cycle, creating densely compacted bags of waste up to 50 kg in weight. The long cylinder also uses less power with each stroke, and can run on as little as 2 bars of pressure. Compacted waste from an XP100S can easily be transported using a Mil-tek Lift Trolley. Using a lift trolley, waste bags are slid from the wagon to the lifting plate, winched up and pushed into waste bins, eliminating the need for heavily lifting.
Ibis is an international hotel company with over 1,000 hotels worldwide. Ibis partnered with Mil-tek because of the increasing volume of waste and the space it was taking up.
Espresso Exchange Cafe in Liverpool bought an XP100 waste compactor to handle their general/mixed waste. The ease of use and small size were particularly advantageous.
Super Brugsen is a supermarket chain with more than 220 stores in Denmark. They use two mobile wagons in their food production are for both their biodegradable and recyclable waste.
A Mil-tek technician will guide you through installation, which is done by simply connecting your XP Waste Compactor to a compressed air supply. Compactors can also be secured to walls or floors.
Fill the wagon with mixed waste. Once the lid is closed the machine is activated. To open, simply lift the lid and wait for the plate to return. Repeat this process until the wagon is full.
To empty, simply release the handle, wait for the pressing plate to return and roll out the wagon. Bags can be sealed using X-Press Ties and a Mil-tek Bag Strapper.
A Mil-tek Lift Trolley eliminates the risk of injury from lifting densely compacted weight. By sliding your compacted bag on to the trolley, you can easily dispose of your waste into a larger waste container.
Every business is different. Our waste consultants conduct site surveys in order to determine the right waste solution for you. Everything is taking into consideration, from the current waste and recycling solution, to the transport logistics, to the space available. The goal isn't to find a suitable waste press or compactor, it's to create a total waste management solution.
Yes you can. The Mil-tek X-Press is air-powered, meaning that not only does is there no risk of contamination from oil, it is also extremely quiet.
The XP range of machines are designed to neatly replace a standard drum-size waste container. This is mounted on a wheeled trolley facilitating simple changing and transport.
As they are air-powered (pneumatic) rather than hydraulic, Mil-tek compactors are extremely quiet (<70 dB). If you have an existing air-line you simply plug the machine and then your existing compressor acts as the engine. If you need to have a compressor installed, a Mil-tek technician will ensure that the compressor is placed at an appropriate distance from the machine.
The X100S Waste Compactor is a hygienic and cost effective solution for busy kitchens. The small footprint allows it to be easily installed in compact locations, and as it is both stainless steel and air-powered, their is no risk of oil contamination or rust.
Full bags of rubbish can be placed directly into the XP100S Waste Compactor, keeping odours and fluids inside the drum to maintain a high standard of cleanliness and hygiene.
Food production and food processing facilities rely on clean environments, sanitation, constant temperatures, in order to safely and hygienically produce and process food.
Miltek Waste Compactor are perfectly suited for such environments, and the stainless steel, small footprint XP100S is both flexible enough and durable enough to seamlessly sit alongside food processing equipment.
Hazardous waste can be compacted directly into the XP100S wagon. Additionally, the XP100S Waste Compactor can be adapted to fit a hazardous/medical waste drum.
The long cylinder safely and hygienically compacts waste, and the wheeled wagon mounted to the drum minimizes any contact staff will have with the material as well as minimizing the potential for leakage.
| Height (mm) | 1970 |
| Width (mm) | 670 |
| Depth (mm) | 704 |
| Weight | 120 kg |
| Bag height (mm) | 600 mm |
| Bag diameter (mm) | 450 mm |
| Weight of full bag | <50 kg |
| Material | General / Kitchen Waste |
| Degree of Compression | < 90% |
| Noise level | < 70 dB(A) |
| Pressure | 1500 kg at 5 bar |
| Approvals | CE, AS/NZ 4024.1 |
Menu
Rue Général Jourdan 7
6700 Arlon
T : +32 (0)471 524 841
© 2021 Mil-tek A/S. All rights reserved. Mil-tek, Miltek and the Mil-tek logo are registered trademarks of Mil-tek A/S.
Want the latest news, insights and expert advice from around the industry? Join the conversation.
By submitting a form on this website, you are requesting for Mil-tek to contact you directly. Your personal information will be kept securely and remain private.
Should you wish to opt-out from all future communications, please contact a Mil-tek representative or click here
